intex led pool sprayer instructions

Southern hemisphere users should position the product with the solar panel facing north.

I have a Model 637/637R/638/638R filter pump. Dont swallow the pool water. Read and follow all safety information and instructions. Yes. Accessories and parts. See instruction in Owner's Manual.

Coat the seals, O-Rings and washers with petroleum jelly (see Owners Manual for detailed instructions). No. Bringing the two modules together very slowly simulate a wall thickness that is greater than 1mm (0.04in) thus triggering the protection mechanism, hence no current to the LED light. No, the INTEX floating pool light is designed for the residential pool use only. The 48" ladder should be used for the 48" height Easy Set Pool.

Why doesnt the 5-in-1 LED Light turn off when I press the ON/OFF button? If there is any straining at the seams, the product is over-inflated. Copyright 2017 Ideal Sources. It will not harm to your INTEX floating pool light. Pull out the left rubber protector to access the battery compartment cover and then press and open the cover. Charging through a vehicles 12V DC receptacle with the detachable 12V DC power cord will take about 2 to 3 hours to fully charge the battery. How do I use the external power case of the 5-in-1 LED light to fully charge the internal battery?Pull out the left rubber protector to access the battery compartment cover and then press and open the cover. It has a limited warranty of one (1) year from the date of the initial retail purchase. If the pump is defective will I be reimbursed for postage?

The Intex LED pool wall light is suitable for above ground pool with a PVC wall thickness of 1mm (0.04in) or less. The Intex solar LED landscape light contains recyclable batteries which should be properly disposed of. The module submerged in water has no wiring linked to an electrical outlet and operates under a very low voltage and current.

See product for additional warnings. Which ladder should be used for Frame Pools?

In addition to that, there are also small holes equally spaced around the perimeter of the solar cover near the edge.

If it is within the warranty period please contact your INTEX Service Station listed in the owners manual (see Limited warranty in owners manual). NOTE: To prevent damage caused by items accidentally falling into the water, do not place valuables and non-waterproof items on the pool tray. Can I use INTEX floating pool light in an in-ground pool? Why is my INTEX floating pool light foggy inside the casing after recharging? Yes, check with your local pool supply store. Why are there two water flow ratings for my filter pump, a Pump Flow Rate and a System Flow Rate?. Keep a working phone and a list of emergency numbers near the pool. What will happen if the Intex LED pool wall light is attached to a wall that is thicker than 1mm (0.04in)? What direction should the solar panel of LED landscape light face to achieve maximum battery charging? Shipping and returns. Back to previous page |

We strongly recommend you to leave the, If it is within the warranty period please contact your, No. My pool cover sinks, it that a defective? Terms & Conditions | Affiliate programs | Cookies policy | Privacy policy | Legal notice | Privacy policy social networks. However, the INTEX ladders were designed specifically for INTEX pools. & @"}!|F le Is the Intex solar LED landscape light an environmentally friendly product? The sprayer can be used with all Intex filter pump models (except models M1, M2, 02, 03R, 603, 604, 637 & 638) and with chlorine generator/filter pump (saltwater pool system/filter pump) models 8111/8221/8231. Can I use the sprayer with other filter pump brands? After receiving the replacement part hoses, they do not fit into the black protruding hose connectors on the side of the pool.

Note: we do not suggest operating the pump for more than 8 hours per day. The Intex solar LED landscape light is an environmentally friendly product that relies on solar energy to charge its battery. During the winter season and cloudy days, sun light might not be sufficient to fully charge the battery, and may not be able to provide maximum hours of illumination when it gets dark. Before climbing the ladder, pull outwards on the legs to fully expand the ladder which should make the ladder feel tighter. What type and size of batteries does the Intex 5-in-1 LED Light deluxe model CL1111 use, and how many?

Only for outdoor use.

I have a Model 603 filter pump and the inlet of the impellor housing is not cantered inside the filter pump cartridge chamber, is the pump defective? Can I use the INTEX floating pool light in other environments?

The 3 functions are: flashing hazard light, lantern/flash mode/OFF and emergency beacon/international SOS signal light. If it still appears to be dirty, it should be replaced immediately.

Is the product still under warranty? Do not use any strong cleaners or hard brushes as these may cause the casing to cloud. 2. Refer to the instructions on the back of the repair patch.

Is it safe to jump or dive into the pool from the ladder or any type of platform? It has a limited warranty of two (2) years from the date of the initial retail purchase before 2012 year.

We recommend circulating the entire pool water once every day; refer to the table attached or the instructional DVD video for operating time. Do not wait any longer and buy Intex LED Pool Sprayer with the best sending conditions and at the best price. Be sure pool and all parts are completely dry before folding, let it sit under the sun for an hour. Does INTEX recommend other pool covers to be used with INTEX above ground pools? Diving or jumping into shallow water can result in broken neck, paralysis, or death. What if my pool is larger than 18 in diameter, a large rectangular or oval pool? Can the Intex LED Pool Wall Light be used as a free standing light outside the water? This will invalidate the filter pump warranty and INTEX will not be responsible for any consequences that might result from opening the motor housing for any reason. The rest may be disposed of in a normal fashion.

endstream endobj startxref Why does the indicator light of my INTEX floating pool light turn on and off after recharging for 7 hours? Your email address will not be published. Includes Type A Adapter (32 to 38 mm) LED light suitable for Intex pools with metal structures: Small Frame, Prisma Frame, Ultra Frame or Graphite. Pool failure might cause large quantities of water to release from the pool. No, the Intex Pool Side Tray is designed for the Intex Metal Frame pools only. The 1-1/4 (32mm) hose size is the correct hose for these pumps. Keep your original sales receipt with Owners Manual, because proof of purchase will be required and must be accompanied with warranty claim. Illumination time may vary based on how long the unit was charged and how old the batteries are.

Water can easily be contaminated.

The pump is not designed for this purpose. The INTEX Pool Side Tray will support a maximum weight of 5 Kg (13.4 lbs) making it perfect for refreshments, sun screen, etc. It cannot be used on Easy Set, Oval, and Sequoia Spirit or non-Intex pools. The original packaging can be used for storage. Re-insert all valve caps afterwards for storage. 60 0 obj <>stream It will prolong your swimming season. Slowly unfold the product and inspect the product for rips, tears or punctures.

Not much info at all in your listing.

A pool vacuum should be used to clean the walls and bottom of the pool. To reset it, ensure the wall thickness is less than 1mm (0.04in), disconnect the device from the main outlet and re-plug the device after 5 to 10 seconds. What should I do for storage after the swimming season?

The 0.25 inch (0.63 cm) gap or the two dents are mold-tooling marks. INTEX floating pool light will provide light for up to 4 hours after a full charge.

Water leakage is mainly caused by a missing O-ring, the O-ring is not sitting properly and/or cartridge cover or collar not properly secure and tightened.

What is the minimum flow rate that is functional with the sprayer? What should I do if I want to store my LED pool wall light after the swimming season? How far can my Intex solar LED landscape light illuminate? The maximum flow of the strainer grid is embossed on the strainer grid. Please refer to the Long Term Storage section in the Owners Manual for details. You need to sign into your account to leave a review. Product availability The LED lights can last for more than 50,000 hours. The product should be fully charged before storage.

Fully recharge the unit and use it according to the Owner's Manual. For the following model number: 56440, 57100, 57132, 57400, 57402, 57403, 57407, 57412, 57420, 57421, 57422, 57426, 57428, 57429, 57433, 57435, 57444, 57449, 57453, 57454, 57469, 57470, 58426, 58439, 58446, 58449, 58924, 59405, 59409, 59416, 59419, 59421, 59431, 59460, 59469, 58922, 57424, 57451, 58915, 57446, 58420, 57109, 57110, 57135, 57437, 57134, 58425, 57105, 59406, 57119, 57120, 57138, 57139, 57136 57101, 57102, 48674, 57137.\, DREO DR-HSP004 Inflatable Play Center Pool IMPORTANT Usage and Safety Instructions READ AND FOLLOW ALL SAFETY INFORMATION AND, INTEX 110033 Boston Valve for Inflatable Boats Instructions HOW TO USE BOSTON VALVE Double valve cap (valve lets, INTEX 25649-3 Inflatable Whale Owner's Manual Read, understand, and follow all instructions carefully before using this product.

It requires Intex treatment plants with a flow rate between 4,542 and 12,113 liters / hour.

How do I know the Intex 5-in-1 LED Light deluxe model CL1111 is in charging mode? Buy Intex LED Pool Sprayer and receive it as soon as possible.

Is it safe?

How often should the filter cartridge be replaced? What is the purpose of the ladder barrier?

Homepage What is the recommended procedure to keep my pool clean while waiting for my replacement pump? Accessories compatibility No. Slowly lift one side of the pool to drain out the remaining standing water. Can the filter pump be operated when a cover is on the pool? No. If an adaptor is provided (vary with models), thread the adaptor (C) to the sprayer connector (A) and insert the garden hose (B) into the adaptor (C).

The switch is located under the solar light portion; unscrew the solar light portion from the lower tube to access the switch. It is NOT suitable for above ground steel wall pools even if the thickness is 1mm (0.04in) or less.

Do not set up the pool on a slope or inclined surfaces.

Move the product (in its package) to the selected site before inflating do not inflate the product and drag it since it may result in leaks or damage. Product Model High Medium Low, Base 5-in-1 LED light CL1110 40Min 3.5H 25H, Deluxe 5-in-1 LED light CL1111 3H 8H 35H.

You can also set the cover under the sun temporarily in order to promote stretching. What are the benefits of using a Solar Cover? Keep unsupervised children from accessing the pool by installing fencing or other approved barrier around all sides of pool. Pools are subject to wear and deterioration.

Yes, it is safe for people to swim while the Intex LED Pool Wall Light is on. The Intex LED pool wall light has a protection feature in case the wall thickness exceeds 1mm (0.04in).

We strongly recommend you to leave the INTEX floating pool light on its charger between uses, this will not damage your light and it will be ready for use anytime you need it. What do I do? What type of swimming pool is the Intex LED pool wall light suitable for? %PDF-1.5 % How long does the LEDs of INTEX floating pool light last before needing replacement? It depends on what pool package is purchased. Instead of using mesh screen, all the, No. There are two (2) hose sizes, model 603/604/637/637R/638/638R use 1-1/4 (32mm) hose size (part# 10116 or #11149), and model 635T/636T/633T/634T/FP621/FP622/SF10110/10220/SF15110/15220/SF20110/20220/CG Model 8111 use 1-1/2 (38mm) hose size (part# 11009). Properly maintain your pool. Only [caracteres] characters left to earn your CoINNs. Do not use any strong cleaners as this may cause the casing to cloud. Also, check the hoses for any pinholes causing water leakage. When searching for a missing child, check the pool first, even if child is thought to be in the house. After that, It has a limited warranty of one (1) year from the date of the initial retail purchase. What should I do? The Intex solar LED landscape light should be setup on a level surface, in a bright sunny area free of obstructions. No, it's normal, and it will not affect the function of the pool cover. No, the pump is to be returned to INTEX, freight prepaid at the consumers expense. If the wall thickness is more than 1mm (0.04in), the self-protection mechanism will be triggered and the LED light will not light up. Breakage due to falls is not covered under warranty. Turn the water on slowly at first to allow water to gradually fill in. Hold the cover on one end, have another person walk around the pool pulling the cover over the inflatable ring (for Easy Set pools), or down the wall (for frame pools). Pay in 3 interest-free instalments. On Model 603/604, Model 637/637R/638/638R, Model 635T/636T, and Model 633T/634T filter pumps, should I turn on the pump before releasing the air pressure? For reference, the strainer grids in your pool are always rated in terms of the System flow rate, since they are part of the pool system. Can I use the Intex LED pool wall light in other environments?

Is a cover included in all the pool sets?

How many charges will I get from my INTEX floating pool light? However, the life of the product is limited by the other factors. If you would like to light the whole pool you may need two or more, Yes, it is safe for people to swim while the, It takes approximately 10 hours for a full charge.

33 0 obj <> endobj Keep children in your direct sight, stay close, and actively supervise them when they are in or near the pool and when you are filling and emptying this pool. I stumbled across you led pool sprayer. GFCIs constantly monitor electricity flowing in the circuitry. Only for domestic use. Why is it foggy inside the lens after recharging?

Because of the extra force required, the System Flow Rate will always be less than the Pump Flow Rate. No.

It takes about 7 to 8 hours to fully charge the battery. Intex ladders are fully functional without the barrier in place; however, we recommend using the ladder barrier if it was included with your ladder as it enhances the safety of the swimming environment. - New- Sealed box- Original accessories- Full manufacturers warranty, - New- Open / Damaged or Repacked box- Essential accessories- Full manufacturers warranty, - New- Manufacturers sealed box- No accessories- Full manufacturers warranty, - Factory remanufactured as new - Manufacturers sealed box- No signs of use- Original accessories- Full manufacturers warranty, - Factory remanufactured - Manufacturers sealed box- Minimal signs of use possible- Essential accessories- Full manufacturers warranty, - Ex Demo- Retail opened box- Minimal signs of use possible- Essential accessories- 1 Year pickup and return warranty, - Ex Demo- Retail opened box (brown box)- Normal signs of use - Essential accessories- 1 Year pickup and return warranty, - A+ Grade refurbished- Approved Selection box- Minimal signs of use- Essential accessories- 1 Year pickup and return warranty, - A Grade refurbished- Brown box- Normal signs of use- Essential accessories- 1 Year pickup and return warranty, - B Grade refurbished- Brown box or Bulk packed- Heavy signs of use- Essential accessories- 1 Month carry in warranty, Buy this product and earn 48 CoINNs / 0.48 . All our devices are 100% tested to be functionally good as new. Protect all pool occupants from recreational water illnesses by keeping the pool water clean. Practice good hygiene. The 42" ladder should be used for the 42" height Frame Pool. What is the spray range for the Intex sprayer? The transmitter module is waterproof against splash and rain, however it is not designed to be submerged in water.

For 2,000 2,500 gal/hr filter pump as Model 51/52 and Model 633/634, the water can spray up to 23' by adjusting the bypass valve. I have read and accept the conditions contained in the Privacy Policy on processing of my data to manage my query or request. The set of small holes on the centre of the solar cover are for safety (same concept as the regular pool cover). The Intex 5-in-1 LED Light deluxe model CL1111 is powered by an internal built-in rechargeable battery, however it can be operated from the external battery pack using 4 x AA size batteries (not included) when the internal built-in battery is exhausted. The built-in battery indicator light will turn red when is in charging mode, and green when its fully charged. A product that faces north will receive the least direct sunlight. Check local regulations for specific directions regarding disposal of swimming pool water. Charging with a computer through the USB cable will take about 7 to 8 hours to fully charge the battery. Did I receive the wrong hoses? Do you need to purchase a GFCI (ground fault circuit interrupter) or RCD (residual current device) outlet? 43043507 Inflatable. See Trouble Shooting Guide in the Owners Manual. Replace the cartridge. Mainly because of the electrical connections' location to the water chamber, and the fact that improper repair may result in electrocution, injury and/or death. You will need two (2) hose adaptors B (part# 10722) when upgrading from 1-1/4 (32mm) to 1-1/2 (38mm) hose fittings. (See owner manual).

The INTEX floating pool light is designed for approximately 500 recharges. How long does it take to charge my Intex solar LED landscape light? Note: remember to turn the switch back on again for normal operation. For 3,000-gal/hr filter pump as Model 520R/530R the water can spray up to 24' by adjusting the bypass valve. Carefully open the inflation valve caps and/or exhaust valve caps to deflate the air chambers, and slowly push the sidewall inward and down to speed up the drainage of the pool. How do I know if I have a truly defective pump and not just an oversight on my part? The INTEX floating pool light contains recyclable batteries which should be properly disposed of. How should I dispose of my INTEX floating pool light? This is a built-in safety feature which prevents overheating. How to find the north or south without a compass? The label will say Krystal Clear Model and there will be a model number next to that.

Do not modify this product and/or use accessories not supplied by the manufacturer. Remove and clean with fresh water and dry all components including hoses. Keep writing. Personal injury may result if reassembly is done improperly. Do not leave toys inside pool when finished using, since toys and similar items might attract a child to the pool.

The Intex 5-in-1 LED Light base model CL1110 uses 3 x AAA cell size batteries to operate. No. For safety reasons there are holes in the top cover.

In order to give you a better service Tradeinn uses cookies. What are the 3 way switch functions of the Intex 5-in-1 LED Light? More information, Automatic translation Do INTEX covers have the mesh screen in the middle? Allow some space between the barrier and pool wall so that a limb could not be accidentally trapped between the barrier and pool wall. Please follow the recharging procedure on the Owner's Manual. The 48" ladder should be used for the 48" height Frame Pool. A pool vacuum should be used to clean the walls and bottom of the pool. Slowly fill with water to a safe level for intended users. How long does it take to charge my INTEX floating pool light?

The INTEX floating pool light is waterproof for depths up to 3 feet (0.91 m) for 24 hours.

Refer to the model name or number stated on the packaging and/or product. How do I use the external power case of the 5-in-1 LED light to fully charge the internal battery?

Is there another brand of ladder that can be used?

Is the pump defective and will it cause water leakage? Do not use if the product is damaged. What should I do if the battery in my Intex solar LED landscape light fails or the LEDs burn out? Home INTEX INTEX 157132NP Gator Inflatable Play Center Instruction Manual, INTEX 157132NP Gator Inflatable Play Center. hbbd``b`$A`V " Dh 0/HqUb n q4# 4?o If it is dirty the water flow will be much less powerful. Yes, even in a large pool the light will brighten up the water. This is normal, due to a temperature differential some fogging or condensation may occur. The ladder should be placed in the pool with the barrier inside the pool. The water flow is not as strong as it used to be, why? Push the barrier away from you as you place the ladder into the pool for the top ring to slip past the barrier. What charging methods can be used for the Intex 5-in-1 LED Light deluxe model CL1111, and how long do I charge it? If I do not want the Intex solar LED landscape light to light up when it is dark, is there a way to turn off the light? What type and size of batteries does the Intex 5-in-1 LED Light base model CL1110 use, and how many? Does the Intex LED pool wall light require special tools, drilling or cutting of the pool wall in order to install it? Is it possible to get a cover for the metal frame pools? Yes, depending on the model, INTEX filter pumps meet UL, CSA, ETL, EN and AS/NZ Standards. Certain types of excessive or accelerated deterioration can lead topool failure.

See owners manual for details.

Which side of the Intex solar cover should contact with pool water? Empty pool completely after each use and store the empty pool in such a way that it does not collect water from rain or any other source. TRADEINN RETAIL SERVICES, S.L.

INTEX does not distribute any pools that are deep enough to allow such activity. It takes approximately 10 hours for a full charge. Explore our home, garden & DIY catalogue. What should I do if the batteries in my INTEX pool lights fail or the LEDs burn out? If not you have a problem. The ladder barrier is an additional safety feature designed to prevent swimmers from swimming behind or through the ladder.

The LED lights can last for more than 20,000 hours. Give your swimming pool a special and elegant touch with this multicolour LED light for INTEX collapsible swimming pools.You dont need to worry about batteries or connecting it to mains electricity because it works using a hydroelectric generator.You just have to connect it to the hose of the swimming pool filter pump so that it gets the energy it needs.Includes type A adaptor for connections of 32 and 38 mm and requires a filter pump of between 4,542 and 12,113 litres/hour for its correct working.It is especially designed for use in INTEX swimming pools and has multicoloured LED lights, you can choose between white, blue, red or green.You will see how these lights shine through a waterfall.You can easily fix it to INTEX collapsible swimming pools with a metallic structure such as those belonging to the following ranges:Small Frame, Prisma Frame, Ultra Frame or Graphite.Buy your INTEX multicoloured light now and youll see how your swimming pool changes look!Multicoloured LED for Intex swimming pools that lights up in 4 colours.Works using a hydroelectric generator and does not require batteries or mains connection.Lights are coloured:white, red, blue and green that light up through a waterfall.Requires an Intex filter with flow rate between 4,542 and 12,113 litres/hour, includes Type A Adaptor (of 32 to38 mm).LED light suitable for Intex swimming pools with metallic structure:Small Frame, Prisma Frame, Ultra Frame or Graphite.

Packaging must be read carefully and kept for future reference.

Empty the pool when not in use. The 52" ladder should be used for the 52" height Frame Pool, 49" and 53" Sequoia Spirit Frame Pool. Do not use lubricants such as machine oil, industrial oil, or house grease. Fold and store the liner and accessories in a dry, clean indoor storage location. Occasionally, petroleum jelly may be applied to the O-Ring located underneath the top filter cover to minimise seal cracking.

Do not install the paddling pool on mud, sand, soft or loose soil condition, deck, platform, balcony, concrete, asphalt or any other hard surfaces. For safety reasons there are holes in the top cover.

Store the device and accessories in a dry, indoor storage area preferably between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit (40 degrees Celsius). Please make sure that your review focus on the product and your experience with it, this will help other customers make more confident decisions. The LED pool wall light uses magnetic wave technology to generate energy and to stay in place. Check state or local laws and codes before setting up pool. Also ensure the solar panel is orientated in the right direction for maximum sun exposure, northern hemisphere users should position the product with the solar panel facing south. Keep all debris out of pool (keep covered) with a debris pool cover, and maintain the proper pH balance and chlorine level. Become certified in cardiopulmonary resuscitation (CPR). Under no circumstances should anyone jump or dive into the pool. Does the pump meet recognized electrical standards? Receive exclusive offers and news that will brighten up your day! Insert four AA size batteries following the orientation shown on the battery compartment. Do I have the wrong size? Can I disassemble the motor housing to clean the inside?

What is the warranty period of Intex solar LED landscape light? What models of Intex 5-in-1 LED Lights are available? No.

Yes, the filter pump comes with a limited written warranty included in your Owner's Manual which covers all manufacturing defects in material and workmanship. The maximum range depends on the flow rate of the filter pump. However, the. Your LED pool wall light should be cleaned with fresh water and mild soap.

How far can the light from my Intex LED pool wall light travel under water? Tradeinn Retail Services as the data controller will process your data in order to respond to your query or request. Pool and pool accessories are to be assembled and disassembled by adults only.

How far can light from my INTEX floating pool light travel under water? No, the INTEX pool side tray is easy to install, it takes only few minutes to install and no tools are required. The hose clamps may also be loose.

However, the life of the product may be limited by other factors. Yes, the pump is designed to be used with INTEX vacuum system (#58947/58948/ 58949/18947/18948/18949) only.

Find a flat, level lawn surface that is free and clear of stones, branches or other sharp objects that may puncture the pool liner or cause injury. If any seam begins to strain, immediately stop the inflation and release air to reduce the pressure until signs of stress on the seam are gone. It can be partially cleaned by rinsing it off with a garden hose and brush.

INTEX pool lights are designed to withstand most falls of less than 3 feet (0.91 m).

Yes, the LED light receiver module will float to the surface for easy retrieval. No. It does not harm the device. Close the cover and replace the rubber protector back. 2. What happens if I leave my INTEX floating pool light in the pool all week long without turning it off? Which way should the ladder be placed in the pool?

Set up time may vary from 10 to 20 minutes excluding water fill time. Find the best deals. %%EOF Please do not use the `Remember me` option if using a computer with public access or that is used by more than one person.

No. The Intex LED pool wall light does not require any special tools, drilling or cutting the pool wall. It does not affect the unit. What can I put on the INTEX pool side tray? 1,000 gal/hr is the minimum flow rate of INTEX filter pumps if the sprayer is to be used effectively. The diameter of the Solar Cover perfectly matches round metal frame pools, due to the shape of the Easy Set pool; you need to fold the edge of the Solar Cover under the top ring. Additionally the, Yes, the pump is designed to be used with, Yes, for hygienic purposes we recommend a filter pump be used with all, No. Its based on the preparation time, the delivery service selected on the Shopping Basket page and when we receive cleared payment. The filter cartridge should be removed and checked at least once a week. Hello! No. Which ladder should be used for Easy Set pools? 58947/18947 and 58949/18949 require a minimal flow of 800 gph (3028 lph), and 58948 requires a minimal flow of 2,000 gph (7,570 lph). If it is still too tight, let a little bit of air out of the top ring, place the ladder in the pool and re-inflate the ring.

How long will the INTEX floating LED pool light stay on after a full charge? O que devo fazer para que as luzes funcionem .O produto ainda esta na garantia?

View in original language. Position furniture (for example, tables, chairs) away from pool and so that children cannot climb on it to gain access to the pool. Do not place pool near or under overhead electrical lines. It is a hydro electric bulb there is a spinner that the water flow apins to charge a battery to power the lights most likely it has something stuck in it even sand can stop the spinning i took it apart and had a bee stuck in the spinner.

Sitemap 5

mountain warehouse shorts